# What do I need to get ready before a heat pump replacement estimate?

> What to gather before we visit to quote your Bakersfield heat pump replacement: equipment labels, comfort problems, access notes and the questions to ask us.

URL: https://verandabakersfieldheatpumps.com/guide/heat-pump-replacement-planning-checklist/

Learn

Twenty minutes with a flashlight and a phone camera makes the estimate visit faster and the written estimate more precise.

Last Updated: November 19, 2026

The short answer

Photograph the labels on the outdoor unit, the indoor unit and the electrical panel, note which rooms run hot or cold, and clear a path to the attic hatch, side yard and panel. Have a year of utility bills handy if you can. We run the load calculation and write the estimate from what we measure.

Key takeaways

- Photos of the equipment labels tell us size, age and refrigerant before we arrive.
- Your list of problem rooms shapes what we test in the ducts.
- Clear access to the attic, side yard and panel saves time at the visit.
- Our written estimate lists the model numbers, the size and why, and every line of work.

## Why does a little homework help?

A [heat pump replacement](https://verandabakersfieldheatpumps.com/heat-pump-replacement/) estimate is only as precise as the information behind it. A few notes and photos from you keep the estimate from [Veranda Bakersfield Heat Pumps](https://verandabakersfieldheatpumps.com/) tied to your actual house.

We measure the house, check the ducts and open the panel at the visit. But you know things we cannot see in an hour: which bedroom never cools, when the bills spike, whether the breaker trips on hot afternoons.

> Go at your own pace
>
> Work through the list below as you have time, and skip anything you cannot reach safely. If you would rather start with a quick self-check, our
>
> system assessment tool
>
> walks through the same ground.

## Which labels do we need photos of?

Every piece of equipment has a nameplate. Together they tell us the size, the age, the refrigerant and the electrical rating of what you have now.

| Where | What to look for | What it tells us |
| --- | --- | --- |
| Outdoor unit | Sticker on a side or back panel with model and serial numbers | Size, age, refrigerant type |
| Indoor unit (air handler or furnace) | Label inside or on the door panel; leave the panels on and photograph only what you can see | Blower size, heat strip rating, coil match |
| Thermostat | The brand and model, plus a photo of the wires if the faceplate lifts off easily | Whether it can run the new system |
| Electrical panel | The main breaker label and a photo of the breaker directory | Service size and open spaces |
| Disconnect box near the outdoor unit | The box itself and any label inside the cover | Circuit size and condition |

If a label is faded or missing, photograph what is there. We read the rest on site.

## Which rooms bother you, and when?

Walk the house and jot down anything that has annoyed you, even if it seems minor:

- Rooms that stay hot on summer afternoons, and which side of the house they face.
- Rooms that run cold on winter mornings.
- Vents with weak airflow or a whistle.
- Dust that builds up faster than it seems it ought to.
- Noise from the indoor unit or ducts.
- Breakers that trip, or lights that dim when the system starts.

A west bedroom that will not cool tends to point to the duct run feeding it, and our [ductwork and airflow guide](https://verandabakersfieldheatpumps.com/guide/heat-pump-ductwork-airflow/) explains what we test. A typical Rosedale replacement turned on exactly that: one crushed supply run to the west bedrooms, replaced on the same day as the 3-ton system.

## What access do we need on the day?

The estimate visit covers the whole system, so we need to reach every part of it:

1. **Attic hatch.** Clear the closet shelf or hallway below it.
2. **Side yard or backyard.** Open the gate and secure pets.
3. **Electrical panel.** Clear boxes or shelving in front of it.
4. **Indoor unit.** Hall closet, garage corner or attic platform, with room to open the panels.
5. **Thermostat.** No preparation needed.

Tell us about anything that makes access harder: a narrow side yard, a unit against a hot west wall, a dryer vent blowing onto the outdoor coil. Those details shape the placement plan, and our guide to [outdoor unit placement and sound](https://verandabakersfieldheatpumps.com/guide/heat-pump-noise-placement-condensate/) explains what we weigh.

## What do we do at the visit?

We start by listening to your list, then work through the house in order. Each step feeds a line on the written estimate.

- **Load calculation.** We use the house’s size, windows, insulation, orientation and attic, because the old unit’s size is only a starting clue. Our guide on [how heat pump sizing works](https://verandabakersfieldheatpumps.com/guide/heat-pump-sizing-manual-j/) explains why square footage alone cannot size a system.
- **Airflow and ducts.** We check the ducts, the return air and the airflow at the registers.
- **Electrical and placement.** We look at the panel and where the outdoor unit sits.
- **Permit.** We check the address before the permit is filed, because the permit office depends on it. Our [permits guide](https://verandabakersfieldheatpumps.com/guide/bakersfield-heat-pump-permits/) explains the steps.

If something needs a closer look, such as a duct run we cannot reach or a panel label we cannot read, we tell you before the estimate goes out rather than guessing at it.

## What will the written estimate show?

The estimate lists each piece of work on its own line, so you can see what you are paying for:

- Model numbers for the outdoor unit and the indoor unit, the size and why we chose it.
- Duct work, if any, and what it fixes.
- Electrical work, if any.
- The permit.
- Removal and disposal of the old equipment.
- Startup checks, with the readings we record when the system first runs.
- Optional upgrades, priced separately.

Veranda’s typical range for a like-for-like ducted heat pump replacement is $6,500 to $15,500. The site visit sets where your house falls in it. Our [replacement cost guide](https://verandabakersfieldheatpumps.com/guide/heat-pump-replacement-cost-bakersfield/) shows the factors that move it.

## Which questions are worth asking us?

Bring these along, or ask us when the estimate arrives:

- Why this size, and what did the load calculation show?
- Are the indoor and outdoor units a matched pair?
- What duct work is included, and what did you find in the attic?
- Does the panel have room, or does the electrical scope change?
- What will the thermostat do with the backup heat?
- Which rebates might apply at this address? We never count a rebate in your price until it is approved, and a program shows on its own line.
- What readings will you record at startup?

If you are still weighing whether to fix the old system, start with our [repair or replace guide](https://verandabakersfieldheatpumps.com/guide/heat-pump-repair-or-replacement/). For a fuller list of what to gather, see [what to gather before an estimate](https://verandabakersfieldheatpumps.com/blog/before-heat-pump-estimate/), or [request your estimate](https://verandabakersfieldheatpumps.com/contact/) when you are ready.

## Questions about this guide

### What if the model number on my outdoor unit is worn off?

The nameplate is usually a metal or foil sticker on the side or back panel, and Bakersfield sun can fade it badly. Photograph whatever is left. We read the rest at the visit, and the indoor unit's label often fills in the gaps.

### Can I plan a replacement before the old system fails?

Yes, and it gives you more room to choose equipment and timing. A spring or fall replacement avoids a summer breakdown and lets us schedule duct or electrical work without a hot house waiting on it.

### Do I need my utility bills for a replacement estimate?

They are not required. Bills help us see how hard the current system works across the seasons and give you a baseline for comparing the new one. If they are easy to pull from your online account, bring a year's worth.

## More guides

- [Cost Guide**How much does a heat pump replacement cost in Bakersfield?** Our typical range, the things that move a price inside it, and three real-world budgets from houses like yours.](https://verandabakersfieldheatpumps.com/guide/heat-pump-replacement-cost-bakersfield/)
- [Decision Guide**Is my heat pump worth repairing, or is it time to replace it?** The answer comes from what failed, what shape the rest of the system is in, and what the fix leaves you with next summer.](https://verandabakersfieldheatpumps.com/guide/heat-pump-repair-or-replacement/)
- [Learn**How do you size a heat pump for my house?** Why we size from the house itself, what we measure, and what happens when the size is wrong.](https://verandabakersfieldheatpumps.com/guide/heat-pump-sizing-manual-j/)
- [Learn**Why do my ducts matter so much to a heat pump?** The equipment makes the cooling, but the ducts decide which rooms get it.](https://verandabakersfieldheatpumps.com/guide/heat-pump-ductwork-airflow/)
- [Learn**What happens during heat pump startup and commissioning?** The last hours of an install decide whether a new heat pump runs the way it was designed to, and we check each step in order.](https://verandabakersfieldheatpumps.com/guide/heat-pump-installation-commissioning/)

## Get an estimate for your house

(661) 269-7726
